Changes

<h1> Normative references</h1>

<h1> Normative references</h1>

The following normative documents contain provisions that, through reference in this text, constitute provisions of this National Standard of Canada. The referenced documents may be obtained from the sources noted below.<br>

The following normative documents contain provisions that, through reference in this text, constitute provisions of this National Standard of Canada. The referenced documents may be obtained from the sources noted below.<br>

NOTE The addresses provided below were valid at the date of publication of this standard.<br>

 

An undated reference is to the latest edition or revision of the reference or document in question, unless otherwise specified by the authority applying this standard. A dated reference is to the specified revision or edition of the reference or document in question. <br>

NOTE: The addresses provided below were valid at the date of publication of this standard.  

See Annex B for regulations that apply to heating fuel oil.<br>

 

An undated reference is to the latest edition or revision of the reference or document in question, unless otherwise specified by the authority applying this standard. A dated reference is to the specified revision or edition of the reference or document in question. <br>  

See [[CGSB_ONGC/003_0002_2019_ENG#Annex B|Annex B]] for regulations that apply to heating fuel oil.<br>

 

The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use.<br>

The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish appropriate health and safety practices in conjunction with any applicable regulatory requirements prior to its use.<br>

'''3.1'''<br>

'''3.1'''<br>

biodiesel<br>

biodiesel<br>

blendstock for middle distillate fuels comprised of mono-alkyl esters of long chain fatty acids derived from renewable sources.  In its neat form, biodiesel is commonly designated as B100 or fatty acid alkyl esters with fatty acid methyl esters  (FAME) being the most common (see 6.25).

blendstock for middle distillate fuels comprised of mono-alkyl esters of long chain fatty acids derived from renewable sources.  In its neat form, biodiesel is commonly designated as B100 or fatty acid alkyl esters with fatty acid methyl esters  (FAME) being the most common (see 6.25).<br>

'''3.x'''<br>

'''3.x'''<br>

! # !! Property !! Limit !! Type 0 !! Type 1 !! Type 2 !! Type 4 !! Type 5 !! Type 6 !! Test Method (ASTM)

! # !! Property !! Limit !! Type 0 !! Type 1 !! Type 2 !! Type 4 !! Type 5 !! Type 6 !! Test Method (ASTM)

|-

|-

| '''6.3''' || Flash point, °C (see 6.19) || Min. || 40.0 || 40.0 || 40.0 || 54.0 || 54.0 || 60.0 || D93, D3828, D7049  

| '''6.3''' || Flash point, °C (see 6.19) || Min. || 40.0 || 40.0 || 40.0 || 54.0 || 54.0 || 60.0 || D93<ref>a The referee method to be used in the event of a dispute.</ref>, D3828, D7049  

|-

|-

| '''6.4''' || Kinematic viscosity, at 40°C, mm²/s (cSt)(see 6.25) || Min. || 1.20 || 1.30 || 1.70 || 5.5 || ― || ― ||D445, D7042 or D7945  

| '''6.4''' || Kinematic viscosity, at 40°C, mm²/s (cSt)(see 6.25) || Min. || 1.20 || 1.30 || 1.70 || 5.5 || ― || ― ||D445, D7042 or D7945  

'''CGSB Statement'''

'''CGSB Statement'''