Changes

CGSB ONGC/003 0002 2019 ENG (view source)

Revision as of 13:43, 25 October 2019

72 bytes added , 13:43, 25 October 2019

no edit summary

Line 111: Line 111:

| <h5>'''6.5'''</h5> <abbr title="Maximum"> Max. </abbr> ||Kinematic viscosity, at 50°C, mm<sup>2</sup>/s (cSt) || Max. || ― || ― || ― || ― || 100. || 650. ||

|-

−

| <h5>'''6.6'''</h5>|| Distillation (see 6.20) || || || || || || || || D86<ref name="a">The referee method to be used in the event of a dispute.</ref>, D2887, or D7345

+

| <h5>'''6.6'''</h5> || Distillation (see 6.20) || || || || || || || || D86<ref name="a">The referee method to be used in the event of a dispute.</ref>, D2887, or D7345

|-

| 6.6 a || 10% recovered, °C || Max. || ― || 215 || ― || ― || ― || ― ||

Line 119: Line 119:

| 6.6 c || end point, °C || Max. || 300. || ― || ― || ― || ― || ― ||

|-

−

| '''6.7''' || Water and sediment, % by volume (see 6.21) || || || || || || || || See below

+

| <h5>'''6.7'''</h5>|| Water and sediment, % by volume (see 6.21) || || || || || || || || See below

|-

| 6.7 a ||Types 0, 1, and 2

Line 126: Line 126:

| 6.7 b ||Types 4, 5 & 6|| Max. || ― || ― || ― || 0.50 || 1.00|| 1.00 || D95<ref name="a">The referee method to be used in the event of a dispute.</ref>, and D473

|-

−

| '''6.8''' || Sulphur, % by mass (see 6.22 and 8.2) || Max. || 0.30 || 0.30 || 0.50 || ― || ― || ― || D1266, D1552, D2622, D4294, D5453<ref name="a">The referee method to be used in the event of a dispute.</ref>, or D7039

+

| <h5>'''6.8'''</h5>|| Sulphur, % by mass (see 6.22 and 8.2) || Max. || 0.30 || 0.30 || 0.50 || ― || ― || ― || D1266, D1552, D2622, D4294, D5453<ref name="a">The referee method to be used in the event of a dispute.</ref>, or D7039

|-

−

| '''6.9''' || Copper strip corrosion, 3 h at minimum test temperature of 50°C h (see 9.4) || Max. || No. 1 || No. 1 || No.1 || ― || ― || ― || D130

+

| <h5>'''6.9'''</h5>|| Copper strip corrosion, 3 h at minimum test temperature of 50°C h (see 9.4) || Max. || No. 1 || No. 1 || No.1 || ― || ― || ― || D130

|-

−

| '''6.10''' || Carbon residue on 10% bottoms, % by mass || Max. || 0.1 || 0.1 || 0.3 || ― || ― || ― || D524 or D4530<ref name="a">The referee method to be used in the event of a dispute.</ref>,

+

| <h5>'''6.10'''</h5>|| Carbon residue on 10% bottoms, % by mass || Max. || 0.1 || 0.1 || 0.3 || ― || ― || ― || D524 or D4530<ref name="a">The referee method to be used in the event of a dispute.</ref>,

|-

−

| '''6.11''' || Ash, % by mass || Max. || 0.010 || 0.010 || 0.010 || 0.10 || 0.10 || 0.20 || D482

+

| <h5>'''6.11'''</h5>|| Ash, % by mass || Max. || 0.010 || 0.010 || 0.010 || 0.10 || 0.10 || 0.20 || D482

|-

−

| '''6.12''' || Electrical conductivity, at point, time, and temperature of delivery to purchaser, pS/m (see 9.5) || Min. || 25 || 25 || 25 || ― || ― || ― || D2624

+

| <h5>'''6.12'''</h5>|| Electrical conductivity, at point, time, and temperature of delivery to purchaser, pS/m (see 9.5) || Min. || 25 || 25 || 25 || ― || ― || ― || D2624

|-

−

| '''6.13''' || Density, at 15°C, kg/m3 (kg/L ) || Max. || 840. (0.840) || 850. (0.850)|| 900. (0.900)|| ― || ― || ― || D1298, D4052<ref name="a">The referee method to be used in the event of a dispute.</ref>, D7042

+

| <h5>'''6.13'''</h5>|| Density, at 15°C, kg/m3 (kg/L ) || Max. || 840. (0.840) || 850. (0.850)|| 900. (0.900)|| ― || ― || ― || D1298, D4052<ref name="a">The referee method to be used in the event of a dispute.</ref>, D7042

|-

−

| '''6.14''' || Total sediment, % by mass || Max. || ― || ― || ― || 0.10 || 0.15 || 0.20 || D4870

+

| <h5>'''6.14'''</h5>|| Total sediment, % by mass || Max. || ― || ― || ― || 0.10 || 0.15 || 0.20 || D4870

|-

−

| '''6.15''' || Pour point, °C (see 6.23, 8.1 and 9.2) ||||||||||||||||See below

+

| <h5>'''6.15'''</h5>|| Pour point, °C (see 6.23, 8.1 and 9.2) ||||||||||||||||See below

|-

|6.15 a

Mark.schuessler

84

edits