Earth Observation Data Management System (EODMS)
What is EODMS?
The Earth Observation Data Management System (EODMS) is a fully integrated geospatial platform provided by NRCan/RNCan to the general public to discover and access authoritative Earth Observation (EO) data. _. Check out the EODMS How-To Guide as well.
The site is located at https://www.eodms-sgdot.nrcan-rncan.gc.ca/index_en.jsp
History
With the second largest landmass on earth and the longest coastline in the world, Canada relies on satellite technology to monitor its land and borders. Providing access to this technology is a core mandate of NRCan's Canada Centre for Mapping and Earth Observation (CCMEO). Through partnerships with government stakeholders, strong links to academia and the private sector, including international collaborations, CCMEO ensures that satellite data is available to serve the needs of the Canadian Government and all Canadians. Since 1971, CCMEO has accumulated an archive in excess of 1 PB of Earth Observation (EO) data. This data originated from various satellites and airborne sensors. The 2012 Canadian Federal Budget included NRCan’s revitalization plan which sought to maintain and improve Canada’s EO satellite capacity and access to this data. This plan was realised through the purchase and installation of four (4) new antennas as well as the brand new Earth Observation Data Management System which replaced several legacy systems.
Services
Today, CCMEO delivers several EO data services in support of the Government of Canada’s priorities on the economic development of natural resources, the North, safety, security, sovereignty, and environmental monitoring.
EODMS
Data services delivered by EODMS include:
- The user-access-controlled (i.e. Government of Canada only) discovery and ordering of RADARSAT 2 (R2) and RADARSAT Constellation Mission (RCM) product as well as commercial satellite imagery (CSI) procured through the NMSO (i.e. COSMOS-Skymed, Deimos-2, DMC, EROS-B, Flock1-ISS, Flock1-SSO, GeoEye-1, GF-1, GHGSat-D, IKONOS, IRS1C-LISS3, IRS1C-PAN, IRS1C-WiFS, IRS1D-LISS3, IRS1D-PAN, IRS1D-WiFS, IRSP6-AWiFS, IRSP6-LISS3, IRSP6-LISS4, KOMPSAT-2, KOMPSAT-3, KOMPSAT-5, PLEIADES, QuickBird-2, RapidEye, SPOT-4, SPOT-5, SPOT-6, SPOT-7, TanDEM-X, Terra, Terra/Aqua, TerraSAR-X, WorldView-1, WorldView-2, WorldView-3, WorldView-4, ZY-3).
- The generic public discovery of RAW RADARSAT-1, RADARSAT-2 , and RCM Science Data.
- The general public discovery and download of RADARSAT-1 Open Data Products
- The general public discovery and download of Canada Centre for Remote Sensing (CCRS) Thematic Data Sets,
- The general public discovery and ordering of the National Air Photo Library
- EODMS is also fully OGC compliant having implemented several standards such as Web Map Tile Service (WMTS), Web Coverage Service (WCS), Catalog Services for the Web (CSW) to name a few. EODMS also implements several geospatial ISO standards including ISO 19115 and ISO 19139.
MULTI-MISSION ARCHIVE (MMA)
The storage backbone of EODMS is CCMEO’s Multi-Mission Archive (MMA) which is the Canadian authorised repository of over 1PB of RADARSAT-1, RADARSAT-2, RCM, NAPL and NMSO commercial imagery. The capacity of the archive is currently 4 PB and growing. The data is stored robustly using redundant storage and securely to comply with RSSSA laws on access controls and dissemination.
COPERNICUS CANADIAN RELAY
To address the Near-Real-Time (NRT) requirements of its users, CCMEO retrieves data from the Copernicus Collaborative Hub and provides a Canadian FTP relay with better download speeds for Canadian end users.
CCMEO provides this service using a small Product Transfer System (PTS) to pull SENTINEL products from the Collaborative hubs via the high speed CANARIE research network through to the EU. It then stages the data on the EODMS Download Server with dependable download speeds for its users.
While this limited access has operationalized the use of SENTINEL data to key GC programs, broad use of SENTINEL-1,2 3,5p is being considered.
Government and Special Access (NMSO, RADARSAT)
NMSO-CSI
The NMSO-CSI is the Government of Canada's initiative to cut down on the procurement of duplicate commercial satellite imagery across the public service. All departments with commercial satellite imagery needs should aim to route all procurement through NMSO E60SQ-120001 after which imagery will be loaded on to EODMS to be re-used (i.e. discovered and downloaded) by the whole of government.
All Government of Canada (GC) employees can have free access to NMSO Commercial Satellite Imagery (CSI) already purchased by the GC. Simply create an account EODMS and then send a request to your Department NMSO point of contact (PoC) for your added privileges. You can find more information on our EODMS_NMSO page as well as the request form and your PoC on our GCPedia (Government-only) page, EODMS Account Approvals for Government and Special Access
RADARSAT
Did you know that all Government of Canada (GC) employees have access to RADARSAT-2 and RCM products for free? Simply create an EODMS account and contact the Canadian Space Agency Order Desk for more information (ASC.r-sat.CSA@Canada.ca). (Learn more about RADARSAT)
CSA Special Access Programs
Did you know that CSA coordinates several [RADARSAT special access programs] to encourage the use of space data including the The International Charter: Space and Major Disasters. Find out more here.
EODMS accounts are granted to, and must only be used by the specified user; accounts are assigned to individuals (authorized users), and not to Departments or groups of people. Both accounts and passwords remain the property of the Government of Canada, and cannot be transferred to other individuals. All accounts are subject to the policies and regulations of the Government of Canada (e.g., the Treasury Board Policy on the Use of Electronic Networks and the NRCan Policy on the Use of Electronic Networks)
What's New?
The upgrade to EODMS (from NEODF) brings new support for previously undiscover-able NMSO commercial imagery including DMC Constellation, TerraSAR-X, SPOT-4 to 7, Cosmo Skymed. There is also new support for the RADARSAT-2 NITF format. Prior to this users would have to look for this data without the help of a map on the NEODF FTP directory structure.