Line 441:
Line 441:
[[File:Certificate of SSDL membership Canada.jpg|thumb|Certificate of SSDL membership of CNSC Laboratory ]]
[[File:Certificate of SSDL membership Canada.jpg|thumb|Certificate of SSDL membership of CNSC Laboratory ]]
+
+
+
+
Detector Type Semi-conductor detector
+
Instrument Operating Range
+
+
Operator Adjustable Controls
+
Turn On/Off
+
+
To turn on the PAD, follow these steps:
+
1. Press the front-panel button, hold for one second, and release it. The display should read “Change.”
+
+
2. Wait until the display reads “Enter.”
+
3. Press the button again.
+
+
4. The display should now read “In.” The LED screen will flash briefly, and a single beep will be emitted from the unit.
+
+
5. If properly enabled, the unit will emit a single beep and the display will change to “d: 0.000 mSv.” It is now in Active Mode, and ready for use.
+
+
To turn off the PAD, follow these steps:
+
1. Press and hold the front-panel button for 8-10 seconds. The display should read “Change” at this point.
+
+
2. Continue to hold the front-panel button so that the words “Go Out” appear on the display.
+
+
3. Release the front-panel button at this time, and the display should read “: Out.” The unit will emit a single beep and the LED display will briefly flash.
+
+
4. If properly executed, the unit will emit a single beep and the display will return to “CNSC.” It is now in “Pause” mode.
+
+
+
Power Supply
+
3 V Lithium coin Batteries
+
+
+
+
Detector Type Semi-conductor detector
+
Instrument Operating Range
+
{| class="wikitable"
+
|'''Detector Type'''
+
|Semi-conductor detector
+
|-
+
|'''Instrument Operating Range'''
+
|
+
|}