169
edits
Changes
Jump to navigation
Jump to search
mLine 483:
Line 483: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Aslam.Ibrahim/Sandbox (view source)
Revision as of 16:22, 12 November 2021
, 16:22, 12 November 2021no edit summary
|'''Instrument Operating Range'''
|'''Instrument Operating Range'''
|
|
|}
{| class="wikitable"
|'''Detector Type'''
|Semi-conductor detector
|-
|'''Instrument Operating Range'''
|
|-
|
'''Operator Adjustable Controls'''
|
'''Turn On/Off'''
To turn on the PAD, follow these steps:
{| class="wikitable"
|'''Press''' the front-panel button, '''hold''' for one second, and '''release''' it. The display should read “Change.”
|
|-
|'''Wait''' until the display reads “Enter.”
'''Press''' the button again.
|
|-
|The display should now read “In.” The LED screen will flash briefly, and a single beep will be emitted from the unit.
|
|-
|If properly enabled, the unit will emit a single beep and the display will change to “d: 0.000 mSv.” It is now in Active Mode, and ready for use.
|
|}
To turn off the PAD, follow these steps:
{| class="wikitable"
|'''Press''' and '''hold''' the front-panel button for 8-10 seconds. The display should read “Change” at this point.
|
|-
|'''Continue to hold''' the front-panel button so that the words “Go Out” appear on the display.
|
|-
|'''Release''' the front-panel button at this time, and the display should read “: Out.” The unit will emit a single beep and the LED display will briefly flash.
|
|-
|If properly executed, the unit will emit a single beep and the display will return to “CNSC.” It is now in “Pause” mode.
|
|}
|-
|
'''Power Supply'''
|
3 V Lithium coin Batteries
|}
|}
