169
edits
Changes
Jump to navigation
Jump to search
Line 441:
Line 441: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Aslam.Ibrahim/Sandbox (view source)
Revision as of 16:57, 12 November 2021
, 16:57, 12 November 2021no edit summary
[[File:Certificate of SSDL membership Canada.jpg|thumb|Certificate of SSDL membership of CNSC Laboratory ]]
[[File:Certificate of SSDL membership Canada.jpg|thumb|Certificate of SSDL membership of CNSC Laboratory ]]
Detector Type Semi-conductor detector
Instrument Operating Range
Operator Adjustable Controls
Turn On/Off
To turn on the PAD, follow these steps:
1. Press the front-panel button, hold for one second, and release it. The display should read “Change.”
2. Wait until the display reads “Enter.”
3. Press the button again.
4. The display should now read “In.” The LED screen will flash briefly, and a single beep will be emitted from the unit.
5. If properly enabled, the unit will emit a single beep and the display will change to “d: 0.000 mSv.” It is now in Active Mode, and ready for use.
To turn off the PAD, follow these steps:
1. Press and hold the front-panel button for 8-10 seconds. The display should read “Change” at this point.
2. Continue to hold the front-panel button so that the words “Go Out” appear on the display.
3. Release the front-panel button at this time, and the display should read “: Out.” The unit will emit a single beep and the LED display will briefly flash.
4. If properly executed, the unit will emit a single beep and the display will return to “CNSC.” It is now in “Pause” mode.
Power Supply
3 V Lithium coin Batteries
Detector Type Semi-conductor detector
Instrument Operating Range
{| class="wikitable"
|'''Detector Type'''
|Semi-conductor detector
|-
|'''Instrument Operating Range'''
|
|}
{| class="wikitable"
|'''Detector Type'''
|Semi-conductor detector
|-
|'''Instrument Operating Range'''
|
|-
|
'''Operator Adjustable Controls'''
|
'''Turn On/Off'''
To turn on the PAD, follow these steps:
{| class="wikitable"
|'''Press''' the front-panel button, '''hold''' for one second, and '''release''' it. The display should read “Change.”
|[[File:EPD pic 1.jpeg|thumb|Picture 1]]
|-
|'''Wait''' until the display reads “Enter.”
'''Press''' the button again.
|
|-
|The display should now read “In.” The LED screen will flash briefly, and a single beep will be emitted from the unit.
|
|-
|If properly enabled, the unit will emit a single beep and the display will change to “d: 0.000 mSv.” It is now in Active Mode, and ready for use.
|
|}
To turn off the PAD, follow these steps:
{| class="wikitable"
|'''Press''' and '''hold''' the front-panel button for 8-10 seconds. The display should read “Change” at this point.
|
|-
|'''Continue to hold''' the front-panel button so that the words “Go Out” appear on the display.
|
|-
|'''Release''' the front-panel button at this time, and the display should read “: Out.” The unit will emit a single beep and the LED display will briefly flash.
|
|-
|If properly executed, the unit will emit a single beep and the display will return to “CNSC.” It is now in “Pause” mode.
|
|}
|-
|
'''Power Supply'''
|
3 V Lithium coin Batteries
|}
[[File:EPD pic 1.jpeg|thumb|Picture 1]]
