169
edits
Changes
Aslam.Ibrahim/Sandbox (view source)
Revision as of 16:53, 12 November 2021
, 16:53, 12 November 2021no edit summary
Line 484:
Line 484:
|
|
|}
|}
+{| class="wikitable"
+|'''Detector Type'''
+|Semi-conductor detector
+|-
+|'''Instrument Operating Range'''
+|
+|-
+|
+'''Operator Adjustable Controls'''
+|
+
+'''Turn On/Off'''
+
+
+To turn on the PAD, follow these steps:
+{| class="wikitable"
+|'''Press''' the front-panel button, '''hold''' for one second, and '''release''' it. The display should read “Change.”
+|
+|-
+|'''Wait''' until the display reads “Enter.”
+
+'''Press''' the button again.
+|
+|-
+|The display should now read “In.” The LED screen will flash briefly, and a single beep will be emitted from the unit.
+|
+|-
+|If properly enabled, the unit will emit a single beep and the display will change to “d: 0.000 mSv.” It is now in Active Mode, and ready for use.
+|
+|}
+To turn off the PAD, follow these steps:
+{| class="wikitable"
+|'''Press''' and '''hold''' the front-panel button for 8-10 seconds. The display should read “Change” at this point.
+|
+|-
+|'''Continue to hold''' the front-panel button so that the words “Go Out” appear on the display.
+|
+|-
+|'''Release''' the front-panel button at this time, and the display should read “: Out.” The unit will emit a single beep and the LED display will briefly flash.
+|
+|-
+|If properly executed, the unit will emit a single beep and the display will return to “CNSC.” It is now in “Pause” mode.
+|
+|}
+|-
+|
+
+'''Power Supply'''
+|
+
+
+3 V Lithium coin Batteries
+|}
[[File:EPD pic 1.jpeg|thumb|Picture 1]]
[[File:EPD pic 1.jpeg|thumb|Picture 1]]